Info: 'The ^2 font was successfuly restored to the printer’s hard disk! Restart the printer before printing again.'
2:
Bounds: x1=244, y1=58, x2=312, y2=86
Type: -128
Info: ''
DITL_156.txt
Items: (2 entries)
0:
Bounds: x1=8, y1=7, x2=408, y2=43
Type: -120
Info: 'Please insert the disk labeled “^0”.'
1:
Bounds: x1=329, y1=48, x2=389, y2=68
Type: 4
Info: 'Cancel'
DITL_155.txt
Items: (14 entries)
0:
Bounds: x1=176, y1=223, x2=236, y2=243
Type: 4
Info: 'OK'
1:
Bounds: x1=51, y1=223, x2=111, y2=243
Type: 4
Info: 'Cancel'
2:
Bounds: x1=172, y1=219, x2=240, y2=247
Type: -128
Info: ''
3:
Bounds: x1=16, y1=8, x2=278, y2=56
Type: -120
Info: 'Please select the printer’s hard disk to which you would like to restore the ^2 font.'
4:
Bounds: x1=31, y1=142, x2=128, y2=158
Type: 6
Info: 'SCSI drive 0'
5:
Bounds: x1=31, y1=159, x2=128, y2=175
Type: 6
Info: 'SCSI drive 1'
6:
Bounds: x1=31, y1=176, x2=128, y2=192
Type: 6
Info: 'SCSI drive 2'
7:
Bounds: x1=31, y1=193, x2=128, y2=209
Type: 6
Info: 'SCSI drive 3'
8:
Bounds: x1=154, y1=142, x2=261, y2=158
Type: 6
Info: 'SCSI drive 4'
9:
Bounds: x1=154, y1=159, x2=260, y2=175
Type: 6
Info: 'SCSI drive 5'
10:
Bounds: x1=154, y1=176, x2=258, y2=192
Type: 6
Info: 'SCSI drive 6'
11:
Bounds: x1=154, y1=193, x2=258, y2=209
Type: 6
Info: 'SCSI drive 7'
12:
Bounds: x1=16, y1=64, x2=277, y2=130
Type: -120
Info: 'Note: You must have a set of backup floppy disks for the ^2 font in order to proceed with the restoration.'
13:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: -127
Info: ' õ'
DITL_154.txt
Items: (4 entries)
0:
Bounds: x1=269, y1=161, x2=329, y2=181
Type: 4
Info: 'OK'
1:
Bounds: x1=11, y1=6, x2=349, y2=92
Type: -120
Info: ' The ^2 font has been successfully copied to the backup hard disk. To protect the safety of your backup hard disk, disconnect the backup hard disk from the printer, and restart the printer before printing again.'
2:
Bounds: x1=265, y1=157, x2=333, y2=185
Type: -128
Info: ''
3:
Bounds: x1=13, y1=97, x2=348, y2=148
Type: -120
Info: ' If ever the hard disk with the ^2 font should become damaged, disconnect it from the printer and reconnect the backup hard disk.'
DITL_153.txt
Items: (3 entries)
0:
Bounds: x1=217, y1=14, x2=277, y2=34
Type: 4
Info: 'OK'
1:
Bounds: x1=7, y1=7, x2=195, y2=41
Type: -120
Info: 'The backup has been completed successfully!'
2:
Bounds: x1=213, y1=10, x2=281, y2=38
Type: -128
Info: ''
DITL_152.txt
Items: (2 entries)
0:
Bounds: x1=8, y1=7, x2=410, y2=73
Type: -120
Info: 'The backup has been completed successfully. Please reinsert the first disk of the backup set, labeled“^2”, so that some additional information can be written to it.'
1:
Bounds: x1=281, y1=75, x2=341, y2=95
Type: 4
Info: 'Cancel'
DITL_151.txt
Items: (2 entries)
0:
Bounds: x1=8, y1=7, x2=391, y2=90
Type: -120
Info: 'Label the next backup disk: “^0”, then insert it in a disk drive.Note: This disk will be initialized and all information that may be on it will be erased.'
1:
Bounds: x1=312, y1=98, x2=372, y2=118
Type: 4
Info: 'Cancel'
DITL_150.txt
Items: (14 entries)
0:
Bounds: x1=175, y1=211, x2=235, y2=231
Type: 4
Info: 'OK'
1:
Bounds: x1=55, y1=211, x2=115, y2=231
Type: 4
Info: 'Cancel'
2:
Bounds: x1=171, y1=207, x2=239, y2=235
Type: -128
Info: ''
3:
Bounds: x1=15, y1=8, x2=281, y2=56
Type: -120
Info: 'Please select the printer’s hard disk to be used for the backup copy of the ^2 font.'
4:
Bounds: x1=31, y1=131, x2=128, y2=147
Type: 6
Info: 'SCSI drive 0'
5:
Bounds: x1=31, y1=148, x2=128, y2=164
Type: 6
Info: 'SCSI drive 1'
6:
Bounds: x1=31, y1=165, x2=128, y2=181
Type: 6
Info: 'SCSI drive 2'
7:
Bounds: x1=31, y1=182, x2=128, y2=198
Type: 6
Info: 'SCSI drive 3'
8:
Bounds: x1=157, y1=131, x2=264, y2=147
Type: 6
Info: 'SCSI drive 4'
9:
Bounds: x1=157, y1=148, x2=263, y2=164
Type: 6
Info: 'SCSI drive 5'
10:
Bounds: x1=157, y1=165, x2=261, y2=181
Type: 6
Info: 'SCSI drive 6'
11:
Bounds: x1=157, y1=182, x2=261, y2=198
Type: 6
Info: 'SCSI drive 7'
12:
Bounds: x1=15, y1=66, x2=281, y2=117
Type: -120
Info: 'Note: If the desired hard disk appears dimmed, try initializing the disk before backing up.'
13:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: -127
Info: ' ñ'
DITL_149.txt
Items: (10 entries)
0:
Bounds: x1=243, y1=234, x2=303, y2=254
Type: 4
Info: 'OK'
1:
Bounds: x1=42, y1=234, x2=102, y2=254
Type: 4
Info: 'Cancel'
2:
Bounds: x1=145, y1=234, x2=205, y2=254
Type: 4
Info: 'Help'
3:
Bounds: x1=137, y1=185, x2=238, y2=200
Type: 6
Info: 'Floppy disks'
4:
Bounds: x1=137, y1=201, x2=275, y2=218
Type: 6
Info: 'Another hard disk'
5:
Bounds: x1=48, y1=192, x2=121, y2=208
Type: -120
Info: 'Backup to: '
6:
Bounds: x1=16, y1=6, x2=326, y2=106
Type: -120
Info: ' A backup copy of the ^2 font can be stored on floppy disks. This will require ^3 double sided disks.'
7:
Bounds: x1=239, y1=230, x2=307, y2=258
Type: -128
Info: ''
8:
Bounds: x1=16, y1=112, x2=325, y2=175
Type: -120
Info: ' If an additional hard disk was attached to the printer when it was turned ON, you can also choose to make a backup onto the other hard disk.'
9:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: -127
Info: ' ï'
DITL_148.txt
Items: (5 entries)
0:
Bounds: x1=252, y1=24, x2=312, y2=44
Type: 4
Info: 'OK'
1:
Bounds: x1=10, y1=7, x2=246, y2=21
Type: -120
Info: 'Download ^1.'
2:
Bounds: x1=10, y1=28, x2=245, y2=44
Type: -120
Info: 'Successful downloads: ^2'
3:
Bounds: x1=10, y1=47, x2=245, y2=61
Type: -120
Info: 'Download failures: ^3'
4:
Bounds: x1=248, y1=20, x2=316, y2=48
Type: -128
Info: ''
DITL_147.txt
Items: (10 entries)
0:
Bounds: x1=217, y1=108, x2=261, y2=127
Type: -128
Info: ''
1:
Bounds: x1=236, y1=194, x2=296, y2=214
Type: 4
Info: 'Cancel'
2:
Bounds: x1=9, y1=7, x2=317, y2=24
Type: -120
Info: 'LaserWriter: ^1'
3:
Bounds: x1=9, y1=36, x2=317, y2=53
Type: -120
Info: ''
4:
Bounds: x1=46, y1=138, x2=317, y2=186
Type: -120
Info: ''
5:
Bounds: x1=9, y1=110, x2=215, y2=126
Type: -120
Info: 'Remaining fonts to download:'
6:
Bounds: x1=220, y1=110, x2=258, y2=125
Type: -120
Info: ''
7:
Bounds: x1=23, y1=65, x2=317, y2=81
Type: -120
Info: 'Font File: ^2'
8:
Bounds: x1=9, y1=82, x2=317, y2=98
Type: -120
Info: 'Font Name: ^3'
9:
Bounds: x1=9, y1=138, x2=41, y2=170
Type: -96
Info: ' '
DITL_146.txt
Items: (11 entries)
0:
Bounds: x1=8, y1=8, x2=97, y2=25
Type: -120
Info: 'LaserWriter:'
1:
Bounds: x1=100, y1=8, x2=330, y2=25
Type: -120
Info: ''
2:
Bounds: x1=52, y1=248, x2=121, y2=268
Type: 4
Info: 'Help'
3:
Bounds: x1=218, y1=248, x2=287, y2=268
Type: 4
Info: 'Delete'
4:
Bounds: x1=49, y1=30, x2=174, y2=46
Type: 6
Info: 'Printer’s Disk(s)'
5:
Bounds: x1=199, y1=30, x2=277, y2=46
Type: 6
Info: 'Printer'
6:
Bounds: x1=49, y1=45, x2=280, y2=66
Type: 6
Info: 'Printer’s Font Expansion Card(s)'
7:
Bounds: x1=8, y1=92, x2=315, y2=236
Type: 0
Info: ''
8:
Bounds: x1=7, y1=75, x2=329, y2=91
Type: -120
Info: ''
9:
Bounds: x1=314, y1=92, x2=330, y2=236
Type: 0
Info: ''
10:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: -127
Info: ' í'
DITL_145.txt
Items: (3 entries)
0:
Bounds: x1=217, y1=14, x2=277, y2=34
Type: 4
Info: 'OK'
1:
Bounds: x1=7, y1=7, x2=195, y2=41
Type: -120
Info: 'Initialization ^2'
2:
Bounds: x1=213, y1=10, x2=281, y2=38
Type: -128
Info: ''
DITL_144.txt
Items: (17 entries)
0:
Bounds: x1=8, y1=8, x2=95, y2=25
Type: -120
Info: 'LaserWriter:'
1:
Bounds: x1=99, y1=8, x2=330, y2=25
Type: -120
Info: ' '
2:
Bounds: x1=77, y1=133, x2=157, y2=153
Type: 4
Info: 'Help'
3:
Bounds: x1=194, y1=133, x2=274, y2=153
Type: 4
Info: 'Initialize'
4:
Bounds: x1=12, y1=165, x2=334, y2=166
Type: -128
Info: ''
5:
Bounds: x1=12, y1=172, x2=334, y2=253
Type: -120
Info: 'Hard disks attached to a LaserWriter II NTX must be initialized before they can be used. Select the printer to which the hard disk(s) are attached with the Chooser desk accessory.'
6:
Bounds: x1=173, y1=46, x2=233, y2=62
Type: 5
Info: 'SCSI 0'
7:
Bounds: x1=173, y1=63, x2=233, y2=79
Type: 5
Info: 'SCSI 1'
8:
Bounds: x1=173, y1=80, x2=233, y2=96
Type: 5
Info: 'SCSI 2'
9:
Bounds: x1=173, y1=97, x2=233, y2=113
Type: 5
Info: 'SCSI 3'
10:
Bounds: x1=238, y1=46, x2=298, y2=62
Type: 5
Info: 'SCSI 4'
11:
Bounds: x1=238, y1=63, x2=298, y2=79
Type: 5
Info: 'SCSI 5'
12:
Bounds: x1=238, y1=80, x2=298, y2=96
Type: 5
Info: 'SCSI 6'
13:
Bounds: x1=238, y1=97, x2=298, y2=113
Type: 5
Info: 'SCSI 7'
14:
Bounds: x1=5, y1=63, x2=164, y2=79
Type: 6
Info: 'Initialize all disks'
15:
Bounds: x1=5, y1=80, x2=164, y2=96
Type: 6
Info: 'Initialize some disks'
16:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: -127
Info: ' ê'
DITL_142.txt
Items: (8 entries)
0:
Bounds: x1=261, y1=220, x2=321, y2=240
Type: 4
Info: 'OK'
1:
Bounds: x1=242, y1=338, x2=302, y2=358
Type: -124
Info: 'More'
2:
Bounds: x1=8, y1=32, x2=360, y2=33
Type: -128
Info: ''
3:
Bounds: x1=257, y1=216, x2=325, y2=244
Type: -128
Info: ''
4:
Bounds: x1=8, y1=8, x2=360, y2=24
Type: -120
Info: 'Backing up the ^2 font:'
5:
Bounds: x1=8, y1=40, x2=360, y2=104
Type: -120
Info: ' The ^2 font is currently stored on a hard disk attached to the printer. This font should be backed up so that if ever the hard disk becomes damaged, it will be possible to restore the font.'
6:
Bounds: x1=8, y1=152, x2=360, y2=216
Type: -120
Info: ' To backup to another hard disk you must have the hard disk with the font, and the hard disk which will be used for the backup, attached to the printer when the printer is turned on.'
7:
Bounds: x1=8, y1=112, x2=360, y2=144
Type: -120
Info: ' A backup copy of the font can be stored on another hard disk, or on 3 1/2" floppy disks.'
DITL_140.txt
Items: (11 entries)
0:
Bounds: x1=259, y1=229, x2=319, y2=249
Type: 4
Info: 'OK'
1:
Bounds: x1=191, y1=297, x2=251, y2=317
Type: -124
Info: 'More'
2:
Bounds: x1=8, y1=32, x2=360, y2=33
Type: -128
Info: ''
3:
Bounds: x1=255, y1=225, x2=323, y2=253
Type: -128
Info: ''
4:
Bounds: x1=8, y1=8, x2=360, y2=24
Type: -120
Info: 'How to view available printer fonts:'
5:
Bounds: x1=8, y1=40, x2=32, y2=56
Type: -120
Info: '1.'
6:
Bounds: x1=8, y1=96, x2=32, y2=112
Type: -120
Info: '2.'
7:
Bounds: x1=8, y1=184, x2=32, y2=200
Type: -120
Info: '3.'
8:
Bounds: x1=24, y1=40, x2=360, y2=88
Type: -120
Info: 'Use the Chooser desk accessory to select the AppleTalk LaserWriter whose fonts you would like to view.'
9:
Bounds: x1=24, y1=96, x2=360, y2=176
Type: -120
Info: 'If the printer has an initialized hard disk attach- ed, you can choose to view fonts in the printer or fonts on the printer’s hard disk. Additionally, if the printer has a font cartridge installed, you can choose to view the fonts on the cartridge.'
10:
Bounds: x1=24, y1=184, x2=360, y2=216
Type: -120
Info: 'Fonts can be deleted from the printer’s hard disk by selecting them and clicking the Delete button.'
DITL_138.txt
Items: (19 entries)
0:
Bounds: x1=254, y1=257, x2=314, y2=277
Type: 4
Info: 'OK'
1:
Bounds: x1=252, y1=311, x2=312, y2=331
Type: -124
Info: 'More'
2:
Bounds: x1=8, y1=48, x2=360, y2=49
Type: -128
Info: ''
3:
Bounds: x1=250, y1=253, x2=318, y2=281
Type: -128
Info: ''
4:
Bounds: x1=8, y1=8, x2=360, y2=40
Type: -120
Info: 'This dialog lets you create a list of printer fonts to download to an AppleTalk PostScript printer.'
5:
Bounds: x1=8, y1=56, x2=32, y2=72
Type: -120
Info: '1.'
6:
Bounds: x1=16, y1=72, x2=36, y2=88
Type: -120
Info: '•'
7:
Bounds: x1=16, y1=88, x2=36, y2=104
Type: -120
Info: '•'
8:
Bounds: x1=16, y1=104, x2=36, y2=120
Type: -120
Info: '•'
9:
Bounds: x1=8, y1=152, x2=28, y2=168
Type: -120
Info: '2.'
10:
Bounds: x1=8, y1=184, x2=32, y2=200
Type: -120
Info: '3.'
11:
Bounds: x1=8, y1=232, x2=32, y2=248
Type: -120
Info: '4.'
12:
Bounds: x1=32, y1=72, x2=360, y2=88
Type: -120
Info: 'Use the Add… button to get a list of font files.'
13:
Bounds: x1=32, y1=88, x2=360, y2=104
Type: -120
Info: 'Open the folder which contains the font file.'
14:
Bounds: x1=32, y1=104, x2=360, y2=152
Type: -120
Info: 'Select the font and click the Add button, or double-click the font name. When you are done adding font files, click the Done button.'
15:
Bounds: x1=24, y1=152, x2=360, y2=184
Type: -120
Info: 'Fonts can be removed from the list by selecting them and clicking the Remove button.'
16:
Bounds: x1=24, y1=56, x2=360, y2=72
Type: -120
Info: 'To add fonts to the download list:'
17:
Bounds: x1=24, y1=184, x2=360, y2=232
Type: -120
Info: 'If there is an initialized hard disk attached to the printer, choose either to download to the printer or to the printer’s hard disk.'
18:
Bounds: x1=24, y1=232, x2=360, y2=248
Type: -120
Info: 'Click the Download button to download the fonts.'
DITL_136.txt
Items: (13 entries)
0:
Bounds: x1=264, y1=251, x2=324, y2=271
Type: 4
Info: 'OK'
1:
Bounds: x1=227, y1=316, x2=287, y2=336
Type: -124
Info: 'More'
2:
Bounds: x1=8, y1=32, x2=376, y2=33
Type: -128
Info: ''
3:
Bounds: x1=260, y1=247, x2=328, y2=275
Type: -128
Info: ''
4:
Bounds: x1=8, y1=8, x2=296, y2=24
Type: -120
Info: 'How to initialize the printer’s hard disk(s):'
5:
Bounds: x1=8, y1=40, x2=32, y2=56
Type: -120
Info: '1.'
6:
Bounds: x1=8, y1=64, x2=32, y2=80
Type: -120
Info: '2.'
7:
Bounds: x1=8, y1=104, x2=32, y2=120
Type: -120
Info: '3.'
8:
Bounds: x1=8, y1=192, x2=32, y2=208
Type: -120
Info: '4.'
9:
Bounds: x1=24, y1=40, x2=376, y2=56
Type: -120
Info: 'Turn on all hard disks before the printer is turned on.'
10:
Bounds: x1=24, y1=64, x2=376, y2=96
Type: -120
Info: 'Use the Chooser desk accessory to select the printer with the attached hard disks.'
11:
Bounds: x1=24, y1=104, x2=376, y2=184
Type: -120
Info: 'Choose to initialize all or some of the attached hard disks. If only some disks are to be initialized, click the boxes with the SCSI numbers of the disks to init- ialize. NOTE: Some printers require that all attached hard disks be initialized at once.'
12:
Bounds: x1=24, y1=192, x2=376, y2=224
Type: -120
Info: 'Click the Initialize button. NOTE: All information on the hard disk(s) being initialized will be erased.'
DITL_135.txt
Items: (9 entries)
0:
Bounds: x1=237, y1=272, x2=297, y2=292
Type: 4
Info: 'OK'
1:
Bounds: x1=252, y1=311, x2=312, y2=331
Type: -124
Info: 'More'
2:
Bounds: x1=7, y1=26, x2=350, y2=27
Type: -128
Info: ''
3:
Bounds: x1=233, y1=268, x2=301, y2=296
Type: -128
Info: ''
4:
Bounds: x1=7, y1=6, x2=151, y2=23
Type: -120
Info: 'The Languages menu:'
5:
Bounds: x1=7, y1=34, x2=349, y2=97
Type: -120
Info: ' When the currently selected printer is a LaserWriter II NTX-J, the Languages menu will appear and you will be able to backup and restore composite fonts.'
6:
Bounds: x1=7, y1=102, x2=351, y2=166
Type: -120
Info: ' If a composite font is on a hard disk attached to the printer, choosing the Backup menu item will let you backup the font to a set of floppy disks or to another hard disk attached to the printer. A'
7:
Bounds: x1=7, y1=203, x2=353, y2=266
Type: -120
Info: ' If a composite font is not on any of the printer’s hard disks, you will be able to select the Restore menu item and restore the font from a set of backup floppy disks.'
8:
Bounds: x1=7, y1=166, x2=351, y2=198
Type: -120
Info: 'backup copy of all composite fonts should always be made.'
DITL_134.txt
Items: (23 entries)
0:
Bounds: x1=336, y1=272, x2=396, y2=292
Type: 4
Info: 'OK'
1:
Bounds: x1=234, y1=272, x2=294, y2=292
Type: 4
Info: 'More'
2:
Bounds: x1=8, y1=32, x2=448, y2=33
Type: -128
Info: ''
3:
Bounds: x1=332, y1=268, x2=400, y2=296
Type: -128
Info: ''
4:
Bounds: x1=8, y1=8, x2=448, y2=24
Type: -120
Info: 'Items in the File menu apply to the selected printer.'
5:
Bounds: x1=8, y1=40, x2=32, y2=56
Type: -120
Info: '•'
6:
Bounds: x1=8, y1=72, x2=32, y2=88
Type: -120
Info: '•'
7:
Bounds: x1=8, y1=104, x2=32, y2=120
Type: -120
Info: '•'
8:
Bounds: x1=8, y1=136, x2=32, y2=152
Type: -120
Info: '•'
9:
Bounds: x1=8, y1=168, x2=32, y2=184
Type: -120
Info: '•'
10:
Bounds: x1=8, y1=216, x2=32, y2=232
Type: -120
Info: '•'
11:
Bounds: x1=24, y1=104, x2=448, y2=120
Type: -120
Info: 'Initialize Printer’s Disk…'
12:
Bounds: x1=24, y1=120, x2=448, y2=136
Type: -120
Info: 'Choose this to initialize one or more printer hard disks.'
13:
Bounds: x1=24, y1=40, x2=448, y2=56
Type: -120
Info: 'Download Fonts…'
14:
Bounds: x1=24, y1=56, x2=448, y2=72
Type: -120
Info: 'Choose this to download fonts to the printer.'
15:
Bounds: x1=24, y1=72, x2=448, y2=88
Type: -120
Info: 'Display Available Fonts…'
16:
Bounds: x1=24, y1=88, x2=448, y2=104
Type: -120
Info: 'Choose this to see a list of available fonts on the printer.'
17:
Bounds: x1=24, y1=136, x2=448, y2=152
Type: -120
Info: 'Page Setup…'
18:
Bounds: x1=24, y1=152, x2=448, y2=168
Type: -120
Info: 'Choose this to set page options.'
19:
Bounds: x1=24, y1=168, x2=448, y2=184
Type: -120
Info: 'Print Font Catalog…'
20:
Bounds: x1=24, y1=184, x2=448, y2=216
Type: -120
Info: 'Choose this to print a list of all the fonts that are available on the printer.'
21:
Bounds: x1=24, y1=216, x2=448, y2=232
Type: -120
Info: 'Print Font Samples…'
22:
Bounds: x1=24, y1=232, x2=448, y2=264
Type: -120
Info: 'Prints the same list as “Print Font Catalog” except the list includes sample text for each font. (This option takes longer.)'
Info: 'This utility will download, list, or print catalogs of fonts on any PostScript imaging device. Other functions are also available for devices equipped with hard disks.'